Polycomp Primer
For an optimal adhesion of the system to the underground –
In order for coatings to bond firmly to the surface, it is necessary to use a primer. A primer serves as an adhesive bridge between the various bases, such as cement screed or concrete and the Polycomp flooring system.
Details of the product Polycomp Primer
PC 01-010
| Viscosity in mPas | 1500-2500 |
| Description | Is a filled, ready-to-use, whitish 2-K primer based on solvent-free (totally solid) epoxy resin. This product is VOC emissions-tested for resistance against humidity from the back as well as according to the AgBB test schedule. |
| Density (g/cm³) | 1.41 |
| Cure Time in h | – |
| Mixing Ratio (Part A : Part B) | 100 : 32 (Weight %) |
| Colour | – |
| Datasheet |  |
PC 01-020
| Viscosity in mPas | – |
| Description | Is a colourless, solvent-free (totally solid) 2-K epoxy resin binder. Shows excellent mechanical properties and is also used for repair purposes. It is used for priming mineral subsurfaces and can also be used with increased residual moisture and on subsurfaces where moisture could penetrate from the back. |
| Density (g/cm³) | 1.10 |
| Cure Time in h | – |
| Mixing Ratio (Part A : Part B) | 100 : 46 (Weight %) |
| Colour | – |
| Datasheet | |
PC 01-030
| Viscosity in mPas | – |
| Description | Is an aqueous, solvent-free, low emission primer on epoxy resin basis. PC 01-030 is diluted with water prior to application (10–20%). PC 01-030 is used as a dilutable primer for coatings open to diffusion, above all on magnesite subsurfaces but also on brickwork, concrete or calcium sulphate and cement-based screed subsurfaces. |
| Density (g/cm³) | 1.80 |
| Cure Time in h | – |
| Mixing Ratio (Part A : Part B) | 100 : 46 (Weight %) |
| Colour | – |
| Datasheet | |
PC 01-040
| Viscosity in mPas | – |
| Description | Is a filled, ready-for-use, whitish 2K primer made from solvent-free epoxy resin. Barrier primer for cement-based subfloors with an elevated residual moisture of max. 6% CM. |
| Density (g/cm³) | 1.50 |
| Cure Time in h | ca. 12–15 |
| Mixing Ratio (Part A : Part B) | 100 : 25 (Weight %) |
| Colour | whitish |
| Datasheet | |
PC 01-050
| Viscosity in mPas | – |
| Description | Is a 3-component priming filler for X-Crete systems |
| Density (g/cm³) | 1.65 |
| Cure Time in h | 12–20 |
| Mixing Ratio (Part A : Part B) (Mixing Rato A : B : C) | 1 : 1 (Weight kg) 8.0 : 8.0 : 21 (Weight kg) |
| Colour | – |
| Datasheet | |
For an optimal adhesion of the system to the underground
In order for coatings to bond firmly to the surface, it is necessary to use a primer. A primer serves as an adhesive bridge between the various bases, such as cement screed or concrete and the Polycomp flooring system.
Request the products you need now.
Are you interested in our products and would you like to find out more? Simply complete the request form below. We would be pleased to advise you and prepare a customised quote. You can also request a sample for first-hand experience of our products.
Please note that we do not sell polyurethanes to private customers.
Your personal information
Fields marked with an * are mandatory
The sample is supplied in a standard colour.
